Procedyne Corp.
11 Industrial Dr.
New Brunswick, NJ 08901 US
Phone: 732-249-8347
Fax: 732-249-7220
Email: info@procedyne.com
Website: http://www.procedyne.com
Procedyne > Powder Processing Equipment > Catalyst Activators  


Catalyst Activators

Procedyne’s high temperature fluid bed system is uniquely well suited for catalyst preparation and catalyst activation. The Procedyne fluid bed catalyst activator is designed to completely and uniformly treat fine powdered catalyst at temperatures up to 1100°C. The fluid bed catalyst activator heats a catalyst powder to elevated temperature and exposes it to a reactive atmosphere.

Procedyne’s fluid bed catalyst activator has met the standards of major engineering and petrochemical companies and can be found operating in plants throughout the world.

Applications

  • Polyethelene catalyst
  • Hydrogenation catalyst
  • Hydrocracking
Features
  • Temperature up to 1100°C
  • Capacity up to 150 cu ft batch volume
  • Any atmosphere required by application
Procedyne can offer the catalyst activator as a complete package with all required ancillary equipment.

Our systems are designed and built for reliable, long-term commercial operation. Materials of construction are selected for high-temperature strength, corrosion resistance, and compatibility with respect to product purity.

Procedyne systems operate on electricity, natural gas, or oil, and are highly efficient, even at high temperature.

Precise temperature control, combined with uniform and complete fluidization, provide for reproducible, high-quality product with extremely high yield.



 Fine Particle Processing 



Procedyne's unique fluid bed technology is ideal for fluid bed processing of even very finely divided, and/or lightweight materials. Materials with particle sizes as small as single-digit micron and densities as low as 0.02 g/cc can be successfully handled.

Procedyne fluid bed technology is primarily based on dense-phase fluidization, at the lower end of the fluidization regime. The low fluidizing velocities - and accordingly low gas flows - typically employed in Procedyne fluid bed systems translate to very effective, efficient and low-cost operation.

This capability for processing of very fine and/or lightweight materials arises from the unique design features we can employ. Prominent among these are:

    Procedyne Patented Screw Plate Gas Distributor
    Our proprietary design gas distributor allows for full cross-sectional distribution of the fluidizing gas, even at very low velocities and pressure drop. This design is both flexible and robust; it can be tailored to suit a wide range of conditions, and will withstand very harsh process environments.

    Indirect Heating
    As Procedyne systems typically operate at very low gas flow rates, indirect heating of the process is possible. This feature allows for processing at bed temperatures up to 1200C, with capability to maintain specific atmospheric conditions. Virtually 100% of the process heat requirement is via the indirect through-wall radiant/convective heat transfer mechanism.

    Integral High-Temperature Gas Filtration
    Even at very low gas velocities, elutriation of fine particles from the fluidized bed can be an issue. Procedyne has a solution in its high-temperature gas filtration system, which can be integral to the fluid bed process vessel, for virtually 100% solids retention in the process environment and particulate-free exhaust.




Print Back